H型并沟线夹YFD
H-CRIMPIT ALUMINUM TAP CONNECTOR
H-CRIMPIT™ compression tap connectors Types YFD, YFN, YFO and YFR are for use with aluminum to aluminum and aluminum to copper connections.
The H-CRIMPIT™ is ideal for making both parallel and tap compression connections in risers and gutters. It should only be installed with hydraulic tools.
YFO140
YFD365
YFN540
YFR865
UL Listed 90° C, Up to 35 kV
• Aluminum splice reducers are dual rated to accommodate both copper and
aluminum wire and are indicated with AL-CU on the connector
• AL9CU indicates the terminal can accommodate aluminum and copper
wire and is UL Listed 90ºC, up to 35kV
• AL7CU indicates the terminal can accommodate aluminum and copper
wire and is UL Listed 75ºC, up to 35kV
• Each connector is factory sealed in polyethylene to ensure connector is delivered
free of foreign materials prior to being used
• Post crimp, the connector is easy to tape or to install an insulating CRIMPIT™
cover (see Type CFA-FR) thereby lowering installation cost
• Connectors are clearly marked
• Factory pre-filled with PENETROX™ A13 oxide inhibitor
• Aluminum oxidation is not easily detected but causes resistance in a connection
so it is imperative that the proper preparation takes place prior to making an
aluminum-to-aluminum connection
PATMDLW-LI电动液压钳
6-Ton Crimping Tool/ 8 AWG-500 kcmil Copper, 8 AWG-350 kcmil Aluminium, Light weight.
PAT750L5电动液压钳
12-Ton Crimping Tool/ 8 AWG-750 kcmil Copper, 8 AWG-750 kcmil Aluminium
PAT46LWL5电动液压钳
15-Ton Crimping Tool/ 8 AWG-1500 kcmil Copper, 8 AWG-1250 kcmil Aluminium
